Avalon Instruments EVO-ZERO, Инструкция по эксплуатации

Страница: 19 / 31

The provided cable set is provided with two RJ11, 4 pin cables and one power cable for the
Safety Brake System.
The two RJ11 cables should be connected to the StarGO and DEC connector in one side and to
the RA and DEC motors in the other side as shown on the picture below.
Below are the operations to perform these connections:
1. Insert the RJ11 male connectors into the corresponding receptacles on the top of the
StarGO box, as indicated in the picture below.
2. Connect the opposite ends of the RJ11 cables in their respective RA and DEC
receptacles on the mount. The white cable should be connected from the StarGo RA
connector plug to the EVO-zero RA Motor cable connector, whereas the black cable
should be connected from the StarGo DEC plug connector to the EVO-zero mount DEC
plug connector.
©
All Rights reserved
19