AW58300HTA, HTS
User’s Manual
PAGE 7
Technical Support
(650) 384-0000
www.avalanwireless.com
Digital Configuration
1. Digital configuration is done by means of the radio’s built in browser interface. The unit should be
powered on and connected at least temporarily to a network containing a computer that can run a
conventional web browser.
2. Using your web browser, connect to the radio as described in the Quick Start Guide found earlier
in this manual.
3. The initial page after a successful login is “Quick Set.” The content of this page is somewhat differ
-
ent for the AW58300HTA Access Point and for the AW58300HTS Subscriber Unit (see the screen shots
in the Quick Start Guide).
4. Each page provides a menu on the left to navigate from section to section. The menu looks like this
when its sections are expanded:
If you wish to Logout or Reboot the radio, these functions are available in this menu.
Beware that certain actions may cause the web page to freeze. In most cases, this is because you are
viewing a browser-cached version of the page and not the live one from the radio. Clear your browser
cache and/or logout and log back in to recover. You are cautioned not to use the “back” button on
your browser to attempt to move back to earlier pages. If you do, you will be logged out and will
need to login again.
In the upper right of the page is a label that tells you the version of the web interface. If the ver-
sion number is not the same as shown below, you might want to visit www.avalanwireless.com (the
Downloads page under the Support menu) to see if a newer version of this manual exists before pro-
ceeding further.
Connecting to the radio
