5. References
Specifications
30
OneConnect OCe14000B-series Adapters Installation Manual
pub-005129 Rev. A
5. References
Specifications
Table 5-1 provides information for OCe14101B, OCe14102B, OCe14104B, and
OCe14401B adapters.
Table 5-1
Adapter Specifications
Parameter
Range
Physical Dimensions
OCe14104B-NX, OCe14104B-UX, OCe14104B-NM, and OCE14104B-UM four-port
SFP+ adapters are available in the standard, full-height form factor only.
Standard, full-height form factor, 6.600 inches by 4.3760 inches (167.64
mm by 111.15 mm) and accommodates the full-height profile bracket
only.
All one-port and two-port SFP+, one-port QSFP+, and two-port 10GBASE-T
OneConnect adapters:
Low-profile form factor, 6.600 inches by 2.713 inches (167.64 mm by
68.910mm), and accommodates both the full-height and low-profile
brackets.
Power Requirements
OCe14101B and OCe14102B SFP+ adapters:
9.2 Watts (typical optical, 10GbE)
8.2 Watts (typical passive 10GbE DAC cable)
OCe14102B 10GBASE-T adapters:
16.0 Watts (typical 10 Gbps, 2-ports)
11.5 Watts (typical 1 Gbps, 2-ports)
12.9 Watts (typical 10 Gbps, 1-port)
10.8 Watts (typical 1 Gbps, 1-port)
OCe14104B adapters
11.33 Watts (typical card power with optic modules)
8.69 Watts (typical power with passive Cu DAC cables)
OCe14401B QSFP+ adapters:
9.96 Watts (typical optical, 40GbE)
8.63 Watts (typical passive 40GbE DAC cable)
Airflow
OCe14101B, OCe14102B, and OCe14104B SFP+ adapters: 150 linear feet per
minute (minimum)
OCe14102B 10GBASE-T and OCe14401B QSFP+ adapters: 200 linear feet per
minute (minimum)
Temperature
0°C to 55°C (operating)
-40°C to 70°C (non-operating)
Note:
Operating the adapter in higher temperatures or lower air flow may
result in premature failures.
Humidity
Operating: 10% to 90% RH, non-condensing, 22°C wet bulb
Non-operating: 5% to 95% RH, non-condensing, 22°C wet bulb