3. Attaching Devices to the Adapter
Connecting Devices to Adapters Using an Optical Cable with LC Connectors
25
OneConnect OCe14000B-series Adapters Installation Manual
pub-005129 Rev. A
To attach devices to the adapter:
1. Connect the optical cable to the adapter. When connecting an optical cable, ensure
that the cages have optical transceivers installed in them (Figure 3-3 on page 25).
Figure 3-3
Installing an Optical Transceiver for the OCe14000B-series -NM/-UM Adapters
2. After the optical transceivers are installed, insert the optical cable into the LC
connectors on the adapter as shown in Figure 3-4 on page 25.
Figure 3-4
Connecting a Fiber Optic Cable for the OCe14000B-series -NM/-UM Adapters
3. After the appropriate cable is connected to the adapter, connect the other end of the
cable to a suitable device, such as a TOR switch.
After the device is connected to the adapter, you are ready to apply power to the
computer and view the LEDs. See chapter 4., “Applying Power and Viewing the
