After you are ready with the set up of the Cut Away handle, hang up your harness somewhere
to test how the Cut Away System is working. And make some exercise for cut away.
We highly recommend every pilot, no matter what experience it has, to try the correct work
of the cut away system on the ground.
Compulsory is every pilot no matter what experience it has, to make one training cut away
on the ground, at least once every two months, or after each cut away/ disassemble of the Cut Away
System.
We offer you a simple system for Cut Away System test on the ground. Everyone can make it at home.
Take 2 long enough ropes and tie 2 loops (about 50 cm one
of each other). Hang the other end of the rope tie on your
home beam or on the tree in your garden (about 50-60 cm
above the ground).
Attach the bottom end to the karabiners and at the top loop attach
the rescue risers.
Pull the cut away handle sharply to the front till your hand is full
straight.
After you finish with the ground test of the Cut Away System and at least one cut away
exercise, you can go for assemble your rescue parachute. If you cannot assemble and pack your
rescue parachute, please contact an authorized competent skydiver rigger.
Top
Bottom
Loops
After you are ready with the set up of the Cut Away handle, hang up your harness somewhere
to test how the Cut Away System is working. And make some exercise for cut away.
We highly recommend every pilot, no matter what experience it has, to try the correct work
of the cut away system on the ground.
Compulsory is every pilot no matter what experience it has, to make one training cut away
on the ground, at least once every two months, or after each cut away/ disassemble of the Cut Away
System.
We offer you a simple system for Cut Away System test on the ground. Everyone can make it at home.
Take 2 long enough ropes and tie 2 loops (about 50 cm one
of each other). Hang the other end of the rope tie on your
home beam or on the tree in your garden (about 50-60 cm
above the ground).
Attach the bottom end to the karabiners and at the top loop attach
the rescue risers.
Pull the cut away handle sharply to the front till your hand is full
straight.
After you finish with the ground test of the Cut Away System and at least one cut away
exercise, you can go for assemble your rescue parachute. If you cannot assemble and pack your
rescue parachute, please contact an authorized competent skydiver rigger.
Top
Bottom
Loops
After you are ready with the set up of the Cut Away handle, hang up your harness somewhere
to test how the Cut Away System is working. And make some exercise for cut away.
We highly recommend every pilot, no matter what experience it has, to try the correct work
of the cut away system on the ground.
Compulsory is every pilot no matter what experience it has, to make one training cut away
on the ground, at least once every two months, or after each cut away/ disassemble of the Cut Away
System.
We offer you a simple system for Cut Away System test on the ground. Everyone can make it at home.
Take 2 long enough ropes and tie 2 loops (about 50 cm one
of each other). Hang the other end of the rope tie on your
home beam or on the tree in your garden (about 50-60 cm
above the ground).
Attach the bottom end to the karabiners and at the top loop attach
the rescue risers.
Pull the cut away handle sharply to the front till your hand is full
straight.
After you finish with the ground test of the Cut Away System and at least one cut away
exercise, you can go for assemble your rescue parachute. If you cannot assemble and pack your
rescue parachute, please contact an authorized competent skydiver rigger.
Top
Bottom
Loops
