AV TOOL ImageMAX PLUS AVT-3800, Инструкция по эксплуатации

Страница: 8 / 13

8
Connecting Power to the Unit
The imageMAX PLUS is shipped with a Switching Power Adapter to convert 100-
240VAC@50-60Hz to 12VDC. Connect the DC Output Cord from the Power
Adapter to the back of the unit and then plug the Power Adapter into an AC
Receptacle. When the unit’s front panel Power Switch is turned On, the Power
LED indicator on the front will illuminate.
5.0 OPERATING THE UNIT
Front Panel Control
The imageMAX PLUS is controlled via Front Panel Buttons and status is
indicated by OSD.
Mode Button
Press the Mode Button repeatedly to toggle through the following controls, as
shown on the OSD (On Screen Display) of the video display connected to the
output of the unit.

Source Mode: While in this mode, press the x or z Buttons to choose the
desired input source from: Video, S-Video or Component Video.

Resolution Mode : If the output is selected as RGB, press x or z Buttons to
choose the output resolution from: VGA, SVGA, XGA or SXGA for PC output.
If the output is selected as YPbPr, press
x or z Buttons to choose from
480p, 576p, 720p or 1080i for HDTV output.

Output Mode : Press x or z Buttons to select either PC (RGB) or HDTV
(YPbPr) out.

Aspect Mode: Press x or z Buttons to choose between Standard Aspect
(4:3) and Wide Aspect (16:9) output.

3D Enhance Mode: Turn the 3D Comb Filter function On or Off with the x or
z Buttons. Note – When VCR or non-standard video source is connected to
the input, the output picture may jitter. If this occurs, please turn off the 3D
Enhance function.

Digital NR Mode: Turn the Digital Noise Reduction function On or Off by
using the x and z Buttons.