AV TOOL CDM-830T, Инструкция по эксплуатации

Страница: 10 / 12

10
5.3.2 Loss of Signal Display Type
A final operator adjustment is the choice of screen display when there is no
signal present on the selected input. Continually pressing the select button until
you are at the point where all four Signal adjustment LEDs are illuminated will
provide a way to set the output signal for a No Input Signal condition. The first
choice will be Color Bars followed by nine (9) full field color choices. The last
choice viewed will be memorized as the output type. Press the + or - buttons to
step through the choices and then press the Select button a final time when you
have made your choice.
5.4 Reset Functions
Pressing the + and – Buttons at the same time while you have one of the
adjustment parameters selected will cause the unit to revert to the default setting
for that parameter. If you press and hold the + and - buttons at the same time for
more than 5 seconds, ALL controls will be reset to their default settings.
6.0 TROUBLESHOOTING
Most problems with the CDM-830TR/CDM-830T Multi-System Converter/Time
Base Corrector are related to misuse of the buttons and signal adjustment
controls. If you find that the picture is not acceptable, place the unit in the
automatic detection mode and then press and hold the + and - buttons for 5
seconds to restore factory defaults. This should clear the problem. Another
potential problem revolves around the cables. Inspect the cables for loose
connectors or damage such as crushed cables or cables with cuts or nicks.
Replace any cable exhibiting these problems.
You also must use the highest quality cables if you want to achieve the best
results. Poor quality cables will cause poor quality signals.
After trying the above suggestions should the problem still persist, contact us for
additional suggestions. Contact AV Toolbox’s parent company, TV One, via our
support website:
http://tvone.crmdesk.com. Create a technical support request
on the site and our support team will respond within a short period of time.
7.0 LIMITED WARRANTY
LIMITED WARRANTY – With the exceptions noted in the next paragraph, AV
Toolbox warrants the original purchaser that the equipment it manufactures or
sells will be free from defects in materials and workmanship for a period of one
year from the date of purchase. Should this product, in AV Toolbox’s opinion,
prove defective within this warranty period, AV Toolbox, at its option, will repair or
replace this product without charge. Any defective parts replaced become the
property of AV Toolbox. This warranty does not apply to those products which