AV TOOL AVT-3900, Инструкция по эксплуатации

Страница: 9 / 15

9
Rear Panel Connectors: The rear panel has the connectors required to
interface the AVT-3900 to the External Inputs, Outputs and Power Supply. The
numbers above and below the drawing relate to the control directly above or
below the number. Refer to the corresponding number and functional description
on page 8.
1 S/PDIF Audio Output. (Used when an HDMI Integrated Audio Steam is not
desired.)
2 3.5mm Aux Audio Input. (Used when the Video Signal is DVI using the HDMI
Port.)
3 3.5mm PC Audio Input. (Connects to Computer’s Audio Output.)
4 Stereo Analog Audio Input for Component Video Input (2x RCA Connectors).
5 S/PDIF Audio Input for Component Video Input.
6 Stereo Analog Audio Input for Composite Video Input (2x RCA Connectors).
7 Composite Video Input (RCA Connector).
8 +5 VDC Input. (Connects to AC Adapter.)
9 S-Video Input (4-Pin Mini-Din).
10 Stereo Analog Audio Input for S-Video Input (2x RCA Connectors).
11 Component Video Inputs (YPbPr or YCbCr) (3x RCA Connectors).
12 PC Video Input (HD-15 Connector from PC’s Monitor Output).
13 HDMI Video Input.
14 HDMI Video Output.
Connect the furnished AC Adaptor to the AVT-3900. (Use only the furnished
adaptor to avoid the possibility of equipment damage due to over-voltage or
under-current from generic AC Adapters). Next, connect the appropriate cables
to the Input(s) and Output and turn on the source and destination devices.
Plug the AC Adapter into the AC wall outlet and press the Power “On” button.
Verify that the LED above the switch lights which indicates that power has been
applied to the AVT-3900.
Note 1: To realize maximum quality and performance, use only the highest
quality cables with the AVT-3900. Low quality cables will cause degradation of
the signal quality and limit the distance between both the source and destination
devices and the AVT-3900.
1 2 3 4 5 6 7
8 9 10 11 12 13 14