AV Stumpfl DECOFRAME Скачать руководство пользователя страница 3

3

AV Stumpfl GmbH | Mitterweg 46 | 4702 Wallern

[email protected] | www.AVstumpfl.com | +43 7249 42811

GENERAL

STANDARDS, REGULATIONS and TECHNICAL 

SPECIFICATION

This projection screen is in accordance with the safety regulations in DIN standard 19045 and 

DIN 56950. The screen fabric is comply with DIN 4102 part 1 and the specifications of the according 

data sheet. For the technical details and projection-specific material parameters please refer to the 

corresponding product data sheet: 

www.AVstumpfl.com/projectionmaterials

Detailed data of frame components and projection surface can be found on the type labels on each 

component and on the labeled soft bags, roller bags or flight cases. 

SAFETY

GENERAL INFORMATION FOR THE MANUAL AND SAFETY

This operating manual forms part of the projection screen system and enables a safe and efficient 

operation. The safety section provides information about important safety aspects for the protection

of persons, frame and projection materials. Task-related warnings/notes are also contained in the 

individual chapters. Read instructions through completely before proceeding and keep for future 

reference. You can find manuals electronically on our website: 

www.AVstumpfl.com/downloads

PACKAGING MATERIAL

WARNING

Danger of suffocation!

• 

Keep packaging material and foils away from children.

• 

Do not let children play with packaging material.

Unpack without cutter or any other sharp tool to avoid damaging of 

the projection screen. Remove packaging materials by hand. Unpack 

projection surface after assembling of the frame.

Содержание DECOFRAME











Отзывы: