Dip Switch Setup
(HDM-3EXCU or HDM-3MXCU) (HDM-3MXC)
Led Status
Power
ON
Power On
OFF
Power Off
Mode
Blinking FW loaded and running
LINK
ON
HDBT LINK
Blinking HDBT LOW POWER MODE
OFF
NO HDBT LINK
Gender
ON
HDBT TX
Blinking HDBT RX
HDMI TX
ON
HDMI With HDCP
Blinking HDMI With Out HDCP
OFF
NO HDMI Video
HDMI RX
ON
HDMI With HDCP
Blinking HDMI With Out HDCP
OFF
NO HDMI Video
Additional Options
Select any additional options you may require.
1. IR Receiver Cable
GND
+V
Sig
-4-
2. IR Blaster Cable
NC
P+
N-
Technical Specifications Output
Signal
Pin #
Signal
Pin #
Signal
1
TMDS Data 2+
11 TMDS Clock Shield
2
TMDS Data 2 Shield
12 TMDS Clock -
3
TMDS Data 2-
13 CEC
4
TMDS Data 1+
14
Reserved
(N.C. on device)
5
TMDS Data 1 Shield
15 SCL
6
TMDS Data 1-
16 SDA
7
TMDS Data 0+
17 DDC/CEC Ground
8
TMDS Data 0 Shield
18 +5 Power
9
TMDS Data 0-
19 Hot Plug Detect
10 TMDS Clock+
Wiring Information & Coding
Conductor
Identification
RJ45 Pin
Assignment
Color Code for
Conductor
Pair 1
5
White-Blue
4
Blue
Pair 2
1
White-Orange
2
Orange
Pair 3
3
White-Green
6
Green
Pair 4
7
White-Brown
8
Brown
-5-
Note
1. The actual transmission quality of CAT6A U/FTP cable
will affect the maximum transmission distance.
CABLE COMPOSITION: 23AWG*4P CAT6A U/FTP
500MHZ Attenuation : 39 (dB/100m)
2. The POC will be attenuated by the actual matching of
the CAT6A Cable, which affects the stability of the
remote power supply.
Reducing the length of the wire or increasing the CAT6A
AWG can increase the stability of the remote power
supply.
©
AV LINK GROUP LTD., All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-6-