How to connect coaxial cable.
Signal cable need to be connected to center ter-
minal block and cable shield clamp by metal
clamp.
Audio L and Audio R clamps are designed to
connect lines from camera (in transmitter) and in
monitor or amplifier(in receiver).
It’s recommended to use cable shield, dedicated
to transmit Audio. It's protect device from distor-
tion and hum collecting from energy network
POWER clamp is designed to power supply of device. Connected direct voltage should be 12 V.
Power input is protected from reverse polarity. Power correctness is indicated by green LED.
An example of typical application of model AV-2
5
00-ECO
How to connect UTP twisted pair.
Twisted pair need to connect with extreme
terminal blocks, metal clamp is used to pro-
tection cables from pulling additionally
On the other side UTP twisted pair is pos-
sible to use typical Video transformer (we
recommended good class) or active
transmitter/receiver.
The set can be powered with available
cables of twisted pair, but you need re-
member about voltage drop. Incoming
voltage can’t be lower that 9V.