Version 1
July 2015
18 of 19
TV Lift System User Manual
2.5.3
Operation
Once the memorized height of the TVL9 column is set, users can use either the control-TH3 or IR Control to
control movement of the lifting system.
(1)
Press and hold the
symbol to move the column upwards.
(2)
Press and hold the
symbol to move the column downwards.
(3)
Release the button at any time to stop the column’s movement.
(4)
The Concealed Switch Box serves as a back-up control if both the TH3 and IR Controls are out of battery.
2.6
Safety (for end users)
(1)
Please adhere to the proper installation procedure as detailed in the installation instructions.
(2)
Safety precaution measures must be practiced at all times during installation of this product.
(3)
The entire installation instructions should be fully read and understood before beginning installation.
(4)
At least two people should be available to mount the TV on the lift mechanism. Please take care when
handling your flat screen TV as injury and damage can result from dropping or mishandling of the TV.
(5)
TV’s should remain upright at all times. Never place screen face down on the floor. This could cause
damage to the TV.
(6)
The stand on your flat screen TV is removable. Please remove the stand prior to installing the TV on the lift
mechanism. Consult your TV’s owner’s manual for instructions for removing the stand.
(7)
Carefully measure all dimensions of your LCD, PLASMA, or LED TV before proceeding. Then consult the
Specification section of this manual for maximum acceptable TV size.
(8)
The TV Lift Mechanism contains moving parts. Please keep hands, arms, and fingers away from the lift and
cabinet lid opening when the lift is in motion. Cables should be wire-tied or secured neatly so the lift does
not contact them during operation.
(9)
About the TSS Safety Strip accessory
