5
Insert the cable through the wires entry at the
bracket wall base (figure 2).
To pull the cable from the wires outlet (figure 3)
use a small pliers.
If a fat cable is used drill a hole in the detector
upper-back to avoid the cable insert via swivel
bracket channel. Seal this hole after installation.
Install the bracket to wall (after inserting the
cable), first remove the Pan Screw from the
bracket and tighten this screw from the detector
base side. Attach the
Eye-Spy II
base to the
swivel bracket with the two supplied locking
screws (figure 1, 3).
Wires Outlet
Tilt S
crew
Pan screw
Be
fore
attaching t
o PIR
rem
ove
thi
s
sc
re
w
Bra
cket to
PIR
locki
ng sc
re
w
s (2
)
Figure 3: Eye-Spy II bracket
