25
Configuring your Modem
First, verify that your modem is Bell 103 and DOS compatible, refer to manufacture data sheet.
Configure your modem port using the SET-UP entry from the main menu (field 7). Specify the
COM PORT, on which your modem is installed, making sure your mouse is not on the same COM
PORT. Do not use COM1 and COM3 or COM2 and COM4 simultaneously. If you cannot
initialize modem, use the Auto Detect option. Av-Gad supply the proper mode, and inverter for
USB computers.
The PC keyboard can also be used, e.g. Move from field to field using arrows (when possible), the
TAB key (forward), shift + TAB (backward), ALT key + highlighted letter. Confirm input in text
fields by hitting the ENTER (return) key. In order to select the required field; hit the highlighted
digit or letter.
Full instructions and latest features are enclosed in the EasyLoad software diskette.
Local Up and Download via PC (AV-232 required)
Generation III panels (marked as V3 or “D”) provides loca
l up and download via RS-232 and
modem. When using the AV-232 interface (special RS-232 cable and interface connecting the PC
to the panel) set the panel to programming mode, ‘P’ is displayed; type 77 at address 200 (i.e.
type
20077) before attempting to establish connection. When using the AV-232 interface, the transfer
rate is 8 times faster than through the modem. With local PC, use the same procedures as
described below. Maximum AV-232 length is five meters. If your computer is using USB as serial
interface contact us for dedicated adapter.
