18G HDMI Extender
5
Receiver Panel Description
1. Power LED:
The LED illuminates green when power is applied and is off when no
power is present.
2.
HDCP LED:
The LED illuminates blue when there is HDMI video traffic with HDCP.
It will blink blue when there is HDMI video traffic without HDCP and will be off
when there is no HDMI video traffic.
3. Link LED:
The LED illuminates blue when there is a valid HDBaseT connection
with the transmitter. The LED is off when there is no valid link.
4. HDMI Out LED:
The LED illuminates blue when there is HDMI video output.
5. Switch for determining the behavior of the RS232 connection:
RS232:
When in the position, it serves as an RS232 serial extension.
FW Update:
When in the position, it allows you to update the firmware by
connecting to a PC and running the batch file. Please contact your distributor
for more details.
6. HDBT In:
RJ45 port to connect the
HDBT Out
port of transmitter by CATx cable.
The left HDCP LED illuminates green when the video contains HDCP content.
The right Link LED illuminates orange when there is a valid HDBaseT link
between the transmitter and the receiver.
7. HDMI Out:
Type-A female HDMI output port to connect an HDMI display device.
8.
RS232:
3-pin terminal block to connect the RS232 control device (e.g. PC) or a
third-party device to be controlled.
9. IR In:
3.5mm mini jack to connect IR receiver or IR system for IR pass-through.
10. IR Out:
3.5mm mini jack to connect IR emitter for IR pass-through.
11.
DC 24V:
Locking power port for 24V DC power adapter connection.
DC 24V
HDBT I
HDMI Out
IR Out
IR In
Rx
Tx
Link
HDCP
R
S
23
2
FW
U
pd
at
e
HDMI Out
1 2 3 4
5
6
7
8
9
10
11
