28
10.Trouble Shooting
Always check the unit and accessories before use to prevent damage and defects.
If this happens...
Cause
Try this solution...
Device doesn’t turn on.
The device turns one
and then off again.
The device turns on, but
intensity cannot be increased
beyond “1” for extended
period. Auto intensity reset
safety feature is initiated.
Batteries are not detected
or expired.
Batteries are not detected
or expired.
System is not set-up properly
or resistance to pads is not
detected by device.
Replace batteries.
1.Re-insert batteries according
to instructions.
2.Or replace batteries.
1. Connect lead wires to device,
electrodes to lead wires, and
place on body part. 2 small or
1 XL electrode pad per channel
is required.
2. Replace used electrode pads.
The quality of the gel may be
diminished.