5
5
n
Notes
:
Make sure that the polarities and impedance of the
speaker and amplifier match.
Avoid routing the speaker wire near electrical wires.
Do not nail, staple, or otherwise puncture the
speaker wire.
Use a speaker wire no thicker than 14 gauge A.W.G.
and no longer than 30 ft to avoid signal loss in the
cable.
3
Mount the Speaker
1.
Remove the grille to expose the mounting screws.
2.
Turn in the mounting tabs, allowing the speaker to fit
into the mounting hole. Then insert the speaker into
the hole.
3.
Turn out the tabs and use the supplied screws to
tighten the speaker to the wall or ceiling. Be careful
not to overtighten the screws.
Tweeter
