VERSION 1.9
J120 (38198-X)
CSI-2 video in
CSI-2 connector
The J120 features one CSI-2 connector with 4 data lanes. It is a 22 pin FPC connector with 0.5mm pitch. It has
the same pin out as the 22 pin CSI-2 connector found on the carrier board for the Raspberry Pi compute
module. Support for the Raspberry Pi cameras is planned.
B102
The B102 is an HDMI to CSI-2 converter module, which may directly be connected to the CSI-2 connector of the
J120. It provides raw uncompressed video to the Jetson TX1 with a resolution up to 1080p60. This video then
may be compressed or processed in the TX1. A typical application for this task is the GStreamer. A driver
developed by Ridgerun is provided and included in the Auvidea TX1 firmware. Please contact us for the source
code of the driver.
Toshiba 41M Pixel Camera
Raytrix provides the C41 camera module.
Auvidea has developed a small interface
board to connect the C41 camera module to
the J120. A resolution up the 4kp60 is
supported (2160p60). The Bayer encoded
video is provided raw to the TX1 and
converted in the graphics engine of the
TX1. For more CSI-2 ports please have a
look at the new J140 carrier board with
three 4-lane CSI-2 ports.
AUVIDEA GMBH
TECHNICAL REFERENCE MANUAL
9
