Auverdion freeDSP-aurora, Руководство пользователя

Страница: 5 / 14

UPDATING THE FIRMWARE VIA USB
This chapter guides you through all the steps to perform a firmware update via an USB
connection. The update itself will be done by a script.
PREPARING FOR UPDATE
For updating the firmware you need an USB2Serial module based on a FTx232 or CP2102N
module, e.g.
https://www.ftdichip.com/Products/Modules/DevelopmentModules.htm#FT2232H_Mini or
similar. Please make sure that your module works with a voltage of +3.3V. Modules with +5V
voltage can damage your freeDSP-Aurora.
You may need to install a driver for your USB2Serial module. Please read the manual of your
module.
If you are updating from version 2.x.x please export your presets first and import them after
the update again.
auverdion
5