Autotek AMX 200.2, Руководство пользователя

Страница: 7 / 12

Caution
First make +12V wire connection then the ground connection and finally the remote connection.
Furthermore the +12V wire must always be fused at the battery for protection against possible damage. If
you need to replace the power fuse, replace it with a fuse of the same value. Using a fuse of a different type
or rating may result in a serious hazard.
This amplifier has signal input terminal of RCA connector typ0e for low level inputs. Adjustment of input
levels is accomplished by the gain control of both channels. Adjusting this control allows the amplifier gain
to be controlled to match and balance both channels.
The RCA input connector should be used when connecting the radio/cassette line out and this connection is
usually made by using RCA-RCA connector wires. Red connector is used for Right channel and White
connector is used for Left channel.