11) FRONT/REAR OUTPUT
The L/R of FRONT or REAR are HIGH PASS OUTPUTS.
These are connected to your vehicle’s power amplifiers.
12) SUBWOOFER OUTPUT
The L/R of subwoofer or LOW PASS OUTPUTS when crossover is used.
These are connected to your vehicle’s SUB amplifiers.
13) STEREO MONO SELECTOR
Allows you to change the subwoofer output from stereo to mono, thus facilitating single subwoofer installations.
14) FRONT/REAR SUBWOOFER FREQUENCY SWITCH
The switch allows you to select (-) 3 dB frequency of both FRONT/REAR/SUBWOOFER L/R. You can control equalizer at FULL
RANGE when equalizer is on.
15) POWER CONNECTOR
Plug the power harness labeled into the power jack. When connecting the harness to the +12 volt DC supply, please be sure that the
conn12 volt DC and ground wires are of adequate thickness to handle the current. The lead marked “REMOTE” is connected
to the power aerial lead of the head unit. If your head unit does not have a power aerial lead, then connect the “REMOTE” to +12 volt
DC through a toggle switch. Be sure to turn the switch off when your radio is not in use.
You must use a fused line for the +12 volt DC power input to protect against short circuit.
