FRONT PARKING SENSOR WIRING INFORMATION
WIRING CONNECTIONS.
POWER FEED.
Red to Ignition Live
POWER FEED.
Black to Chassis
FOOT BRAKE - USE THE YELLOW WIRE.
Sensors will come on when the foot brake is applied and go off when not
applied. There is no hold on delay.
REVERSE LIGHT - USE THE BROWN WIRE.
When reverse is selected the sensors will arm and remain on for 15
seconds. If they do not detect anything they will turn off. If they do detect they will remain on for another 15 seconds.
TACT SWITCH - THIS IS A TIMER SWITCH.
Press green button for two seconds and the sensors will activate, hold
for 5 seconds and they will deactivate. If the sensors detect an object they will remain on, if no detection they will turn
off after 30 seconds.
USING YOUR OWN SWITCH.
Connect the yellow wire to a rocker switch, Switch on = Sensors on, Switch off =
Sensors off.
RED
BLACK
YELLOW
BROWN
TACT SW
FOOT BRAKE
ONLY
YES
YES
YES
NO
REVERSE &
BRAKE SWITCH
YES
YES
YES
YES
ROCKER
SWITCH
YES
YES
ROCKER
SWITCH
NO
NO
PSPK1
YES
YES
PSPK1
NO
NO
TACT SWITCH
YES
YES
NO
NO
YES
TRAILERS, CARAVANS AND BIKE RACKS.
If you tow and don't want the sensors activating when in reverse the simplest method is to fit a rocker switch in the
boot and wire it between the reversing light and the 12 volt input of the parking sensor control box.
DISPLAYS
Front displays will only work on front sensors and rear displays will only work on rear displays. For display orientation
please check the manual.
