Installation Guide
P. 5
..................................................to access mode 2.
3.
The parking lights will flash and the horn will honk (if programmed) once or twice to confirm entry
into a mode.
4.
Release the valet button.
Once the desired mode has been selected, the unit will fall (by default) into function #1 of that mode; you can
now select the option you want in function 1. Once this option has been chosen, the unit will move on to
function 2 of the mode selected, and so on.
for Option 1,
for Option 2,
for Option 3;
for Option 4;
+
for Option 5.
+
for Option 6.
Programming Options
MODE 1
* INDICATES DEFAULT SETTING
FUNCTION 1 – Ignition-controlled door locks
OPTION 1*
Ignition lock
DISABLED
OPTION 2
Ignition lock
ENABLED
OPTION 3
Ignition unlock only
OPTION 4
Ignition lock only
FUNCTION 2 – Door lock / unlock pulse timing
OPTION 1*
7/10-sec. lock / unlock pulses
OPTION 2
4-sec. lock / unlock pulses
OPTION 3
7/10-sec. lock pulse and two ¼ -sec. unlock pulses
OPTION 4
1/10-sec. lock / unlock pulses
FUNCTION 3 – AUX 3 Programming – Press the
button for 4 seconds (for options 1 through 5)
OPTION 1*
Constant while button is pressed
OPTION 2
Toggle ON – Toggle OFF
OPTION 3
60-second pulse
OPTION 4
1-second pulse with unlock pulse and disarm pulse
OPTION 5
1-second pulse with disarm pulse. Once the Trunk is closed, arms pulse after a 5-sec.
delay.
OPTION 6
Disarm function (with
UNLOCK
button)
FUNCTION 4 – AUX 2 Programming – Use with
button (for options 1 through 4 and Car Finder)
OPTION 1*
Constant while button is pressed – car finder
DISABLED
OPTION 2
Toggle ON/OFF with 30-second time out or until ignition ON – car finder
DISABLED
OPTION 3
30-second pulse - car finder
DISABLED
OPTION 4
60-second pulse - car finder
DISABLED
OPTION 5
Retain accessory output - car finder
ENABLED
OPTION 6
Arm output - car finder
ENABLED
FUNCTION 5 – AUX 1 Programming
OPTION 1*
Priority door
OPTION 2
Dome light output for 60 seconds
OPTION 3
Arm output
OPTION 4
Disarm output
OPTION 5
Retain accessory output
