P. 5
User Guide
AS-6210
Remote Valet
This feature will put your vehicle into Valet Mode using the remote transmitter instead of
the Valet button as above.
Note:
Once the Electronic Valet is activated, the remote starter and Alarm features are
disabled.
To put the system
into
Valet Mode:
1.
Hold down the
UNLOCK
and
START
buttons simultaneously for 3 seconds.
2.
The Parking Lights will flash 3 times.
The siren will chirp twice and the LED will come
ON
.
To take the system
out of
Valet Mode:
1.
Hold down the
UNLOCK
and
START
buttons simultaneously for 3 seconds.
2.
The Parking Lights will flash 2 times.
The siren will chirp twice, then pause, then chirp twice again, and the LED will go
OUT
.
“Home Valet”
TM
Mode
This safety feature will remotely place the vehicle into a no-remote-start mode: if the
vehicle is parked indoors there is no danger of the vehicle starting by accident with the
remote control.
Note:
Once the Home Valet Mode is activated, the vehicle will not start by remote.
To
activate
the Home Valet Mode:
•
Press the
LOCK
or
UNLOCK
button.
•
Within 3 seconds, press the
STOP
button until the parking lights go
out
.
To
disable
the Home Valet Mode:
•
Turn the ignition key to the
IGNITION ON (RUN)
position.
The system will warn you if someone attempts to start your vehicle while it stands in
Home Valet Mode. The parking lights will:
•
Go
ON
then
OFF
; then
•
Flash
twice
, pause; then
•
Flash
twice
again.
Panic Mode
Safety feature:
Activate Panic Mode in an emergency situation.
In an emergency situation, you can activate Panic Mode using the
LOCK
or
UNLOCK
or
STOP
button. This will:
•
Shut down the engine,
•
Unlock the doors (if
UNLOCK
is
pressed)
•
Or lock the door (if
LOCK
is
pressed),
•
Disarm the Starter Kill and
•
Activate the siren for 1 minute.
(See below for a description of the Starter
Kill.)
To activate Panic Mode
•
Press and hold the
STOP
button for approximately 3 seconds until the siren starts to
sound and the parking lights flash
