Autostart AS-2310TW-FM, Руководство пользователя

Страница: 12 / 15

P. 12
User Guide
Option 3:
Level 1
(requires pressing the
SHIFT
button 1X)
Æ
Customized features
Level 2
(requires pressing the
SHIFT
button 2X)
Æ Multi car operation
Level 3
(requires pressing the
SHIFT
button 3X)
Æ
Basic features
Option 4:
Level 1
(requires pressing the
SHIFT
button 1X) Æ
Basic features
Level 2
(requires pressing the
SHIFT
button 2X)
Æ Customized features
Level 3 (
requires pressing the
SHIFT
button 3X) Æ
Multi car operation
Example: If the multi-level features have been modified from their default state to option 3, the
setup would be as follows:
For “Basic features”:
To access the aux.2 feature, the user needs to press on the
SHIFT
button three (3) times
followed by the
LOCK
button.
To access the status request feature, the user needs to press on the
SHIFT
button three (3)
times followed by the
TRUNK
button.
To access cold weather mode, the user needs to press on the
SHIFT
button three (3) times
followed by the
START/STOP
button.
Vehicle Status Request
The status request feature allows the user to see the status of the vehicle
⎯
i.e.: if the doors are
locked or unlocked or if the vehicle is in cold weather mode, home valet mode, in valet mode or
how much time is left in the run time cycle. The following charts (Tables 1 and 2) indicate the
confirmation sequences.
To retrieve the vehicle status:
Press and release the
SHIFT
button then press and release the
TRUNK
button (there will be a beep).
The transmitter will then flash the corresponding sequence of LEDs depending on the vehicle’s
status.
If the engine is NOT running, refer to Table 1.
If the engine IS running under a remote start, refer to Table 2 (if the doors are locked)
or refer to Table 3 (if the doors are unlocked).
The status request feature is a two-step procedure:
•
The first sequence of flashes denotes if the vehicle’s doors are locked or unlocked.
•
The second sequence of flashes (if applicable) denotes if the vehicle is Cold weather mode,
Home valet mode, or, Valet mode.
•
If there is no second sequence transmission, that the vehicle is not in any of the three (3)
mentioned features (Cold weather mode, Home valet mode or Valet mode).
Status Request When the Engine IS NOT Running
STATUS SEQUENCE LED #1 LED #2 LED #3 LED #4 Beep(s)
Lock 3 flashes X X X 1
Unlock X 3 flashes X X 2
1
st
sequence if
locked
3 flashes X X X 2
1
st
sequence if
unlocked
X 3 flashes X X 2
Cold
Weather
2
nd
sequence X X X 1 second X