TURBO MODE (OFF by default)
When this option is programmed, the unit will always keep the vehicle running
for 60 sec after arming and locking the vehicle to complete ready-mode.
NOTE:
The vehicle can be shut off by remote within the 60sec, if turbo idle
down is not required.
To activate TURBO MODE you must do the following:
1. With vehicle running and the doors closed, press LOCK UNLOCK or
START button on the transmitter until the Parking lights flash 3 times
then come on solid.
2. Remove the key and exit the vehicle.
3. Lock doors - Vehicle will stay running for 60sec.
VALET MODE
The system can be placed in Valet Mode to disable the remote starting
capabilities. If the vehicle needs to be serviced, or if you park it indoors, there
is no danger of accidentally starting the engine by remote control.
To put the system into Valet Mode, turn the key to the ignition ON position,
and press and hold the Valet switch for approx. 3 seconds. The LED will turn
ON, letting you know that it is now in Valet Mode.
To take the system out of Valet Mode, turn the key to the ignition ON
position, and press and hold the Valet Switch for 3 seconds. The LED will turn
OFF, letting you know that it is now out of Valet Mode.
COLD WEATHER MODE
Your Autostart can be set in Cold Weather Mode. When programmed, it will
start and run your engine every 2 hours for 4-minute intervals (gas engines) or
20-minute intervals (diesel engines), during a period of 24 hours.
To program Cold Weather Mode, press and hold the
STOP
button for approx.
5 seconds until the parking lights flash 3 times.
To exit Cold Weather Mode, do any of the following:
•
Open the hood
•
Start the vehicle by remote
•
Turn the ignition ON
•
Press and hold the
STOP
button for approximately 5 seconds.
NOTE
: By pressing the brake, parking lights will flash once to let you know
that your are in Cold Weather Mode. You must program Cold Weather Mode
each time you want to use it.
PARKING LIGHT DIAGNOSTIC
FLASHES RATE
DESCRIPTION
2 Slow
System power up
1
Quick
1- Doors locked by remote
2- Cancellation of cold weather mode
3- System shut down after expiration of
run time
2
Quick
Doors unlocked by remote
3
Quick
System is placed into cold weather mode
4
Quick
12-volts is detected on brake line while
running by remote
5
Quick
1- New transmitter code learn
2- Confirmation of tach learn
8
Quick
Confirmation of module being reset
10
Quick
Ground detected on hood-switch line while
remote started or running by remote
ON
20 sec.
Hood switch was pressed 2 times within 4
seconds
2
7
