P. 8
User
Guide
AS-1535 SH
Horn Confirmation Option
If the Horn Confirmation option is configured at installation, you will hear the horn when you
press the
LOCK
button to confirm the locking and arming of the vehicle. (This feature may be
configured for confirmation upon either the first or the second press of the
LOCK
button.) Horn
Confirmation is required for using Panic Mode.
Engine Run Time
If you have a gas engine, your system can be programmed to run the engine for 4, 15, or
25 minutes (15 minutes by default). If you have a diesel engine, the module can be
programmed to run the engine for 9, 20, or 30 minutes (20 minutes by default).
Key Sense Option
If your Unit is installed with Key Sense, when in Passive Mode the Starter Kill will not rearm if
the ignition key is detected in the ignition switch. Likewise, Secure Lock (if configured – see
p. 7) will not lock nor rearm your vehicle when the ignition key is detected in the ignition switch.
The
AUX 1
,
AUX 2
and
AUX 3
Outputs
Your Module is delivered with three configurable auxiliary outputs allowing the user to remotely
control several features such as horn confirmation upon the first or second
LOCK
, priority door
access, remote trunk release, headlight illumination, dome-light control, power-window / sun-
roof closure…
It should be noted that the
AUX 1
output is activated upon the second press of the
UNLOCK
button,
while
AUX 2
is activated by simultaneously pressing the
LOCK
and
UNLOCK
buttons.
If your vehicle is equipped with electric trunk release, the system can be configured to allow
you to open the trunk using the remote control. The
TRUNK
button can be configured to disarm
the factory alarm before the trunk is opened, or to fulfill various other functions such as
headlight illumination, dome-light control, power-window / sun-roof closure…
Multi-car Operation
This system allows for Multi-car Operation. This allows the owner of two identically-equipped
systems, installed on two vehicles, to control both systems with one Transmitter. (Both vehicles
must be equipped with an identical Module.)
The remote Transmitter of the primary vehicle can control the Starter Kill system, the Door
Locks and the remote Starter and Trunk operation of the second vehicle. The remote
Transmitter of the second vehicle can also operate the primary vehicle.
To control the 2
nd
vehicle, simultaneously press the
TRUNK
button and the button of the function
you wish to use:
x
Press
TRUNK
+
LOCK
button simultaneously: ....
LOCK
x
Press
TRUNK
+
UNLOCK
:.....................................
UNLOCK
x
Press
TRUNK
+
START
: ......................................
START
x
Press
TRUNK
+
STOP
:.........................................
STOP
x
Press
TRUNK
+
LOCK
+
UNLOCK
: .........................
TRUNK
Home Valet Mode:
o
Press
TRUNK
+
LOCK
o
Within 3 seconds, press
TRUNK
+
STOP
Starting or stopping the vehicle in S a f e S t a r t Mode:
o
Press
TRUNK
+
START
…
o
Within 3 seconds press
TRUNK
+
START
again
Starting or stopping the vehicle in S w a p S t a r t Mode:
o
Press
TRUNK
+
LOCK
+
UNLOCK
simultaneously
Troubleshooting Poor Transmitting Range
Many factors may affect the operating range of the transmitter. Some of these are:
x
The condition of the battery in the transmitter.
