P. 4
User Guide
The parking lights will come on. Remove the key, exit the vehicle and lock the doors (if
desired). The engine will continue running and will turn itself off when the pre-programmed
run time expires.
Valet Modes
Ignition Valet
The system can be placed in valet mode to disable the remote starting capabilities. If the
vehicle needs to be serviced, or if you park it indoors, valet mode will prevent the engine from
being accidentally started by remote control.
To ENTER Valet Mode
1. With the key in the ignition switch, turn the key to the ON
(RUN/IGNITION)
and then
OFF positions 5 times within 10 seconds.
2. The parking light will flash 3 times indicating the module is now in valet mode. The
LED will turn
ON
solid.
To EXIT Valet Mode
1. With the key in the ignition switch, turn the key to the ON
(RUN/IGNITION)
and then
OFF positions 5 times within 10 seconds.
2. The parking light will flash twice indicating the module is now out of valet mode.
The led will turn OFF.
Valet Mode Using the Valet Button
(Available only of the plug-in valet switch is installed)
To put the system into valet mode:
1. Turn the key to the
IGNITION ON (RUN)
position.
2. Press (for at least 1 second) and release the valet button.
The parking lights will flash 3 times.
3. Turn the ignition
OFF
.
The L.E.D. will come ON
solid, indicating the module is now in valet mode
.
To take the system out of valet mode:
1. Turn the key to the
IGNITION ON (RUN)
position.
2. Press (for at least 1 second) and release the valet button. The L.E.D. will go OUT.
The parking lights will flash twice.
3. Turn the ignition OFF.
The LED will turn OFF.
The valet button can only be used if the vehicle keys are in the
IGNITION ON (RUN)
position.
Panic Mode
Note: Panic mode can only be activated if the horn has been adequately configured
by your installer.
In an emergency situation, you can activate panic mode using the
LOCK
or
UNLOCK
button. This
will:
•
shut down the engine,
•
unlock the doors (with the
UNLOCK
button)
•
or lock the doors (with the
LOCK
button),
•
disarm the Starter Kill and
•
activate the horn for
25
sec.
Note: See the description of the starter kill option later in this Guide.
To activate panic mode:
•
Press and hold the
UNLOCK
button for approximately 3 sec. until the sound signal starts
and the parking lights flash: this will unlock the doors before the sound signal starts.
•
Or press and hold the
LOCK
button for approximately 3 seconds until the sound signal
starts and the parking lights flash: this will lock the doors before the sound signal
starts.
