background image

P. 6 

User Guide

 

 

To 

arm 

the Starter Kill in Active or Passive Mode, press and hold button 

Ι

 on the 

transmitter. The parking lights will flash once. (If Remote Door Locks were installed, this 

will also lock the doors). In Passive Mode, the system will automatically arm 1 or 3 minutes 

after the engine is shut down. 

Remote Door Locks 

Note: 

Can only be activated if button 

Ι

 is programmed as 

LOCK

 or 

UNLOCK

 button. 

If your system was installed with the Remote Door Locks option, you will have the 

convenience of remote keyless entry. 

To 

LOCK

 your doors and 

ARM

  the Starter Kill: 

1.

 

Press and hold button 

Ι 

for approx. 1 sec. 

2.

 

The parking lights will flash once and the L.E.D. will flash slowly to confirm that the 

doors have been locked and that the Starter Kill feature is enabled if it was 

installed. 

To 

UNLOCK

  your doors and 

DISARM

  the Starter Kill: 

1.

 

Press and hold button 

Ι 

for approx. 1 sec. 

2.

 

The parking lights will flash twice and the L.E.D. will go out to confirm that the 

doors have been unlocked and that the Starter Kill feature is disarmed if it was 

installed. 

Note: 

If installed and configured in Passive Mode at installation, the Starter Kill feature will 

rearm automatically 60 seconds after the doors are unlocked. For that reason, you may 

have to unlock your doors a second time if some time elapses before you actually start 

the engine. 

Ignition-controlled Door Locks Option  

This is an added security feature. If your system was installed with the Ignition-controlled 

Door Locks option, the doors will automatically be locked as soon as the user presses the 

brakes while the ignition key is in the 

IGNITION ON (RUN)

 position. 

When the key is turned to the Ignition 

OFF

 position, the doors will automatically be unlocked. 

(Only available if remote Door Lock Option is installed) 

Secure Lock Option 

Before it can remote-start your vehicle, the module must first disarm the factory security 

system. 

The Secure Lock feature may be required on certain vehicle models with factory security 

systems that automatically unlock the doors when the security system is disarmed. 

To keep your vehicle protected when the factory security system is disarmed for a remote 

start, Secure Lock will relock your doors as soon as the vehicle has started. 

Once the engine run cycle ends, Secure Lock will rearm your factory security system. 

Remote Trunk Release Option 

If your system was installed with the remote trunk release, you can open your trunk by 

pressing buttons 

Ι & ΙΙ

 simultaneously on the remote transmitter.  Vehicles must have an 

electric trunk

 

switch or a remote trunk button on the vehicle’s OEM transmitter for this option 

to be compatible with the module. 

Starter Kill / Anti-Grind 

This added security feature will immobilize your vehicle when the system is armed 

(LOCKED). If your Module was installed with the Starter Kill option, you will not be able to 

start your vehicle with the key unless the system has been disarmed first (UNLOCKED). 
The Starter Kill option can be programmed to be 

ACTIVE

 (will not arm automatically) or 

PASSIVE

 

(will arm automatically). In 

PASSIVE

 Mode, your installer can program it to arm automatically in 

1 minute.  Note that in Mode 1- Function 3- Option 3, pressing button 

Ι 

 will always give an 

Содержание AS-1291










Отзывы: