Autosnap
GD860
User’s Manual
2.3.11
Comparions mode
Comparison mode is used on the diagnosed vechiles to make data comparison
analysis, which is based on datastream comparison with the normal
datastreams recorded under self-learning mode. When select comparison mode,
user need to choose the working mode of vehicles used for comparison.
Operation: Click [Comparison mode]
Select recorded working condition
mode needed for comparion --
Select datastream item which is needed to
compare.
2.3.12
Live Data Records
.
Live Data Recording is used to record currently displayed live data. The data is
saved as trip records which can playback and be analyzed in future.
Note: The live data record should last at least 5 seconds. Exceed 5 seconds,
users can stop recording. Click “Stop”, the poped out live-data page can be
save various descriptions about the datastream.
Operation: click [Start Record]
click [Stop Record]
Input data
information of records.
2.3.13
Playback
The playback interface is used to playback the stored trip record, which
displays the historic vechcle working condition and all kinds of parameters
Operations: Click [Data Playback] in main interface
Select coppresponding
record for playback
Click [Playback]
2.3.14
Other Functions
This manual describes the device’s basic operations and functions. Diagnostic
softwares for different vehicle brands may differ in some functions, especially
in operation of some special settings and adapation functions. The manual will
not offer detailed description. When use the device, please refer to operation
tips and helps in the system.
Email: [email protected]
Skype:kathy-tool
yahoo:[email protected]