![background image](http://html1.mh-extra.com/html/autoscript/elp-15-plus/elp-15-plus_user-manual_3022799018.webp)
16
Installation
2.
If the payload is not correctly balanced, lock the tilt axis and:
a)
If the payload is falling forward (front heavy), move the
counterbalance weights further back on the rods.
b)
If the payload is falling backwards (rear heavy), move the
counterbalance weights further forward on the rods.
3.
Secure the counterbalance weights and re-check the balance.
Splitting the Counterbalance weights
If the counterbalance weights have too much effect even in the closest
mounting position, one half can be removed.
1.
If fitted, remove the counterbalance weights from the prompter
assembly.
2.
Using a 4 mm Allen
key, remove the two
screws securing the
weights together.
3.
Separate the weights
and refit one of the
halves with the
clamping screws.
Additional Adjustments
Additional adjustments can be made to the MT-RED camera mounting
plate if balancing cannot be achieved or there are specific requirements
for an installation.
The top camera mounting plate can be moved to offset the position of
the camera, by removing the bottom screws with a 4 mm Allen key and
reseating the assembly in the other four screw holes.
Camera Support Adjustments
If necessary, further balancing and positional adjustments can be made
to the camera head support (manual or robotic).
WARNING!
Before attempting to adjust the prompter
assembly, the tilt axis of the head support must be securely
locked horizontally (tilt axis).
Содержание ELP 15 PLUS
