Autoscript E.P.I.C. 17 Inch TFT, Руководство пользователя

Страница: 30 / 41

28
Installation
Additional Accessory Connections
Autoscript accessories such as tally sensors or the ClockPlus-E can
also be connected to the monitor.
Opto Sensor Connection
Provides connection for an Autoscript external opto sensor attached to
a camera tally light to activate the built-in tally light on the monitor.
Tally Light Repeat Connection
Provides connection for an Autoscript tally device such as the TallyPlus
to relay the tally indication signal being used by the monitor.
Accessory DC Connection
Provides a 12V DC supply to operate external accessories such as the
Autoscript TallyPlus.
For more information on the specifications of the accessory sockets,
see the section
Connections Data on page 35.
CAUTION! The accessory DC out socket is intended for
use with approved Autoscript accessories only. Do not
exceed the current output limit of the product when
powering auxiliary devices.