Autoscript Control Net HC-1, Руководство пользователя

Страница: 26 / 32

24
Troubleshooting
Fault Check Comments
The controllers or smart combiner
box are not powering up. Check that the AC or DC power sources are
connected and secured.
See the section Power Connections on page 13.
The smart combiner is not powering
up.
Check and if necessary replace the fuse.
See the section Changing the Fuse (Smart
Combiner Box) on page 23.
The hand, foot or desk controller is
powered up, but not controlling the
prompted text. Check that the system connections are correct and
secured. See the sections Control Net Connections on
page 10 or Serial Connections on page 11.
Another controller is being constantly used by
another operator.
See the section Priority Control on page 22.