Autoquip Piston Air Eco-7M Engine II Series, Инструкция по установке и эксплуатации

Страница: 8 / 12

www.aqautomation.com
3. The three exposed ports of the air flow route (2 on each cylinder
cap and 3 on the body) must be protected to prevent any ingress of
dirt/grit. This is critical.
Reassembly
1. Ensure all parts are clean and grit free
2. Insert replacement piston/liner/seal assemblies ensuring that the seal
is at the cylinder cap end
3. Fit the O Ring in the groove on cylinder depending on the type.