SmartPot 1 System
setup instructions
Using your front instruction sheet, repeat the module set up instructions for the number of trays.
If you require any guidance
email - [email protected]
Advice
Allow your plants to establish for 7-10 days before turning system on
[email protected] I www.autopot.co.uk I +44 (0)844 8581520
Plan views
and options
Suggested layouts
• 1x 47 ltr tank and lid
• 1x 1Pot XL tray and lid
• 1x 18.9 ltr SmartPot
• 1x AQUAvalve
• 1x 6mm top hat grommet
• 1x 6mm golf filter
• 1x 6mm in-line tap
• 1.5 metres of 6mm pipe
• 1x PotSock Round
SmartPot 1 System contents
SmartPot 1 dimensions
Advice
47 ltr
tank
375mm
300mm
615mm
• When growing with multiple SmartPots room humidity may increase due to the exposed surfaces of the fabric pots.
• Pot up your plants, water through, then allow your plants to establish in the pots for a period of 7 to 10 days before
turning your system on. This will encourage a stronger and healthier root system.
• Always raise your tank to a minimum of 150mm above the highest AQUAvalve and re-fill the tank when there is
approximately a 1/3 of the solution left - NEVER ALLOW THE TANK TO RUN EMPTY.
• For best results, we recommend mineral fertilisers. Do not use organic fertilisers, as they have a tendency to block
small pipe work.
• Clean all substrate from the bottom and sides of the pots before placing in each tray. This will ensure your system is
clean from the start.
• Always use free draining substrates, for example: soil/perlite, coco/perlite, soil/clay pebbles, coco/clay pebbles,
rockwool/clay pebbles.
1
7
8
9
2
Fit the PotSock Round
over the base of
each SmartPot
5
Position tray so it is
level.
Push 6mm top hat grommet
into tank, then push 6mm
pipe through grommet.
Inside the tank push
6mm filter into 6mm pipe.
3
Remove collar.
Push 6mm pipe through
collar and attach to
AQUAvalve nozzle.
Rescrew collar -
DON’T
overturn...
when you feel
it grip
STOP.
Connect AQUAvalve
so ‘half moon’ is on T
section in the tray.
4
Fill SmartPot with
medium and pot
up plants.
Water through pot
and allow to drain
outside the tray.
Place SmartPot in the
tray, make sure it is
CLEAN!
Place lid over valve
onto tray.
Cut 6mm/16mm pipe
to appropriate length
Connect your 6mm pipe
to the relevant fitting
6
380mm
285mm
280mm
355mm
18.9 ltr
pot
6mm pipe
6mm top hat grommet
6mm inline tap
6mm golf filter
AQUAvalve
47 ltr
Tank
6mm pipe
6mm top hat grommet
6mm inline tap
6mm golf filter
AQUAvalve
47 ltr
Tank