background image

1Pot setup

instructions

Using your front instruction sheet, repeat the module set up instructions for the number of trays.

If you require any guidance 

email - [email protected]

Advice

1

8

2

Put black marix 

disc in pot

Allow your plants to establish for 7-10 days before turning system on

[email protected]  I  www.autopot.co.uk  I  +44 (0)844 8581520

6

5

Position tray 

so it is level

Insert root control 

disc 

Gold face up

3

Remove collar
Push 6mm pipe through 

collar and attach to 

AQUAvalve nozzle
Rescrew collar - 

DON’T 

overturn... 

when you 

feel it grip 

STOP

Cut 6mm/16mm pipe 

to appropriate length

Connect AQUAvalve 

so ‘half moon’ is on 

T section in the tray

4

Plan views 

and options

60Pot system contents

1Pot dimensions

Advice

Fill pot with medium 

and pot up plants.

Water through pot 

and allow to drain 

outside the tray.

Place pot in the 

tray, make sure it is 

CLEAN!

Place lid over valve 

onto tray

•   Pot up your plants, water through, then allow your plants to establish in the pots for a period of 7 to 10 

days before turning your system on. This will encourage a stronger and healthier root system.

•   Always raise your tank to a minimum of 150mm above the highest AQUAvalve and re-fill the tank when 

there is approximately a 1/3 of the solution left - NEVER ALLOW THE TANK TO RUN EMPTY.

•   For best results, we recommend mineral fertilisers. Do not use organic fertilisers, as they have a tendency 

to block small pipe work.

•   Clean all substrate from the bottom and sides of the pots before placing in each tray. 

This will ensure your system is clean from the start.

•   Always use free draining substrates, for example: soil/perlite, coco/perlite, soil/clay pebbles, 

coco/clay pebbles, rockwool/clay pebbles.

Suggested layout

400 ltr

FlexiTank

6mm pipe

16mm pipe

AQUAvalve

16mm click-fit tank adaptor & filter

16mm in-line tap

16mm cross connector

16mm – 6mm cross connector

7

According to the size of your system connect your 

6mm/16mm pipe to relevant fitting or tank...

System requires minimum 
400 litre FlexiTank (supplied)

400 ltr

FlexiTank

680mm

1110mm

•  1x 400 litre FlexiTank
•  60x 1Pot tray and lid
•  60x 15 litre pot
•  60x AQUAvalve
•  1x 16mm click-fit tank adapter and filter
•  3x 16mm inline tap

•  1x 16mm cross connector
•  30x 16 - 6mm cross connector
•  25 metres of 16mm pipe
•  30 metres of 6mm pipe 
•  60x marix disc
•  60x root control disc

400 ltr

FlexiTank

Elevate tank 

150mm from 

floor to maintain 

gravity pressure

Отзывы: