·
Open the XS9 pins 1 and 2. With SIM installed the LED should flash by 3 green flashes in series.
Страница 1: ... change of indication from 4 to 3 flashes If the command is not supported by current version Incorrect message answered or is not delivered to the module apply hardware reset 2 Hardware reset Disconnect the GSM module from the kit disassemble its housing unplug the 6LR61 battery if it was installed early and take of the printed circuit board PCB Prepare 6LR61 battery in a good condition If the unp...
Страница 2: ...Use housing s screw or screwdriver from the set Push on battery s connector thus connecting the battery to second terminal The LED will go on for 2 seconds and then should go off Keep on holding the battery connected for 15 seconds more ...
Страница 3: ... Open the XS9 pins 1 and 2 With SIM installed the LED should flash by 3 green flashes in series ...
