Installation (how to attach/where to attach/angle) for passenger cars and SUVs
For perfect installation of K15 please make sure to follow the details of this manual step by step.
Install this product with the car’s engine turned off.
1. Apply the double-sided
tape enclosed in the package
and peel the film of the tape off.
Installation instruction and calibration
5. Arrange the power cord neatly
alongside of the windshield and
door pillar trim. Use the provided
wire splice clips.
6. Connect the power cable
to the main body.
7. When connecting the turn signal
cable or video out cable,
use the nearest connector or please
refer to page 12 in USER’S Manual.
Installation (example for passenger car, SUV & Large SUV.)
Horizontal
Vertical
2. Stick the base bracket on
the windshield #1 or
#2 position
4. Stick the GPS sensor
on the top of
the windshield.
3. Put main device
into the base
bracket
