25
Daily Timer Start:
The feature is very useful for the driver who wants to run
the vehicle punctually at the same time next morning. Before set-up of the
“Daily Timer Start”, you should set you time for engine start.( see Timer
Setting /
Timer set-up for “Daily Timer Start, page 16)
ENTER:
1. Press the
button once to remote start the vehicle.
2. Immediately depress the
button once, within 2 seconds
3-a.
3 Hours Timer Start:
Rapidly depresses the
button (or depresses
+
buttons, if you program
+
buttons = Start / Stop button.) The
parking light will flash (3) times. The siren or horn chirps (3) times. The vehicle
is now programmed to start every (3) hours.
3-b.
Daily Timer Start:
Depress the transmitter
button first,
within 3 seconds press and hold
button for two seconds.
The parking light will flash (6) times. The siren chirps (6)
times. The vehicle is now programmed to start at the real
time of the next day. Your set time for the next day engine
start flashes for approx. 3 seconds on the LCD screen. After
3 seconds the
icon stays displayed on the LCD screen.
4. Press the brake pedal to stop the vehicle running.
Exit the timer start:
Timer start can be exited manually as follows:
1. Make sure the remote start system is not operating the engine.
2. Turn the ignition on. The LED and parking light will flash (4) times. The horn
chirps (4) times. Or
F. TEMPERATURE CHECK (OPTIONAL)
If you installed the optional temperature sensor, you can monitor,
through the LCD screen, the present indoor temperature of the
passenger compartment before cooling or heating your vehicle.
Press the transmitter
buttons first, within 3 seconds press
the
(
)
button, the in-door temperature will be shown on the
LCD screen. This reading may be higher than actual ambient
temperature due to the greenhouse and is relative only the inside
vehicle temperature.
G. TO TURN OFF THE REMOTE START:
When the engine is running (by remote start), if you want to stop it,
1. Press
button once on the remote transmitter under remote
start mode.
2. Move the optional remote start enable toggle switch to OFF
position. (If insta lled)
3. Press the brake pedal The vehicle will shut down and turn off the
parking light
to indicate engine stopped
