Autopage RF-425LCD Скачать руководство пользователя страница 9

 

9

While the power save mode, the LCD remote transceiver “sleep”  until a button is pushed, 
extends   the life of battery. When power save mode is “Off”, the remote control will wake up 
periodically to check for messages from the security module. 

1. Press and hold all four remote control buttons simultaneously unit one long 

beep is heard. Programming has now been entered. 

2. Within 5 seconds, press the 

 button to toggle “On” or “Off”. The remote will 

beep once for “On”, twice for “Off”. When power save mode is “On”, the 

 

icon on the LCD screens to indicate entry the “power save mode” 

3. To exit programming mode, take no action for five seconds. The remote control 

will generate two long beeps to indicate programming mode has been exited. 

  

 

Screen Lamp ON: 

 Press the 

 button once; the LCD screen lamp will turns on for 5 seconds 

 

System’s  Status  Check 

When you want to check the system’s present status 

through the LCD screen, Press the transceiver 

 button first, within 3 seconds 

press

 

 and   buttons at the same time. It responds with one melody sound, the 

LCD screen should be illuminated.  

Note:

 If it has no responds  then you are out of range. 

  

 

 

Clear the Flash Icon and Melody Sound: 

Cycle ignition then press the 

 button first, within 3 seconds press   and 

 buttons at the 

same time. It will clear the flash icon and melody sound on the LCD screen transceiver 
 

Stop The Trigger Melody Sound: 

While triggering the alarm the LCD screen will alert user through melody sound and flashing 
trigger icon, press any button on the LCD remote transmitter to stop melody sound only, the 
remote control buttons will not send a command to the system. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание RF-425LCD














Отзывы: