8. With a partner, lay the Desk Top
(D)
upside down on the ground and attach the
Beams using 20
(Y)
.
Y
Y
Y
Y1
F
Y
Y1
Y1
F
Y
10. Attach Control Switch
(K)
into its corresponding holes
near the edge of the bottom of
the desk using 2
(Y1)
.
9. Attach the
Control Box
(F)
to the bottom
of the table
using 2
(Y)
.
K
YOUR DESK IS READY TO USE.
Designed by Autonomous
X4
X4
X2
X2
Press up and down
buttons at the same
time until it beeps and
goes down to the
lowest level
Release both buttons
and press down button
until exact height
appears on display.
IMPORTANT!
You must RESET the desk prior to use.
12. Plug the Power Cable
(K)
into Control Box
(F)
and then into a power outlet. Repeat process with
the Desk on other side.
K
L
F
A2
I
F
11. Connect the Control Box
(F)
to corresponding
Control Switch
(K)
, and Legs cable
(L)
. Repeat process
with the Desk on other side.
13. Before use, reset each Control Box following these instructions on both sides.
!
NOTE: Make sure no obstacles are in the desk’s path. Make sure cords are a length that
will accommodate the change in height.
