-|Transparent Guide|-
Dimensions
•
Unit: mm, For the detailed dimensions of the product, follow the Autonics web site.
■ Terminal type
■ Connector type
35
2
□
39
□
30
Ø25
16.8
4
4.2 8
31.5
10
38.5
141.5
180
8
34.5
11.5
4
2
□
39
□
30
Ø25
16.8
4
4.2
35
8
31.5
10
38.5
116.5
155
8
34.5
11.5
4
■
Panel cut out
30
30
4-M4
22
10
Cautions during Use
•
Follow instructions in ‘Cautions during Use’. Otherwise, it may cause unexpected accidents.
•
Use the switch with the dedicated controller. Do not use the switch with another controller
randomly.
•
When it comes to the Solenoid Lock/Mechanical Release model, make it to be locked by
supplying power after the door is closed. If the power is supplied when the door is opened, the
switch will not be locked.
•
This unit may be used in the following environments.
- Indoors (in the environment condition rated in ‘Specifications’)
- Altitude max. 2,000m
- Pollution degree 3
- Installation category Ⅲ
- Enclosure Type Ⅰ
Sold Separately
•
Operation key
•
Slide key unit
•
Connector cable for the connector type model
Ordering Information
This is only for reference.
For selecting the specific model, follow the Autonics web site.
SFDL
-
❶
❷
❸
-
❹
❺
❻
❶ Lock/Release method
M: Mechanical Lock/Solenoid Release
S: Solenoid Lock/Mechanical Release
❹
Connection type
No-mark: Terminal type
C: Connector type
❷
Contact
No-mark: 4-contct (connected)
C: 4-contact (not connected)
5: 5-contact
6: 6-contact
❺ Connection outlet specification
M20: M20 thread
G1/2: G1/2 thread
❻ Release key type
No-mark: Cross type
K: Special type
❸ Contact composition
4-contact
5-contact
6-contact
A
Lock 1 N.C. / 1 N.O. +
Door 1 N.C. / 1 N.O.
Lock 1 N.C. / 1 N.O. +
Door N.C. 2 / N.O. 1
Lock 2 N.C. /1 N.O. +
Door 2 N.C. /1 N.O.
B
Lock N.C. 2 + Door N.C. 1 / N.O. 1 Lock N.C. 2 + Door N.C. 2 / N.O. 1 Lock N.C. 3 + Door N.C. 2/N.O. 1
C
Lock N.C. 1 / N.O. 1 + Door N.C. 2 Lock N.C. 1 / N.O. 1 + Door N.C. 3 Lock N.C. 2/N.O. 1 + Door N.C. 3
D
Lock N.C. 2 + Door N.C. 2
Lock N.C. 2 + Door N.C. 3
Lock N.C. 3 + Door N.C. 3
Release Key
Release key type
Normal position
Manual unlock position
Cross type
Special type
•
You can manually unlock the switch in the emergency situation such as blackout, when wiring,
before supplying power, or when testing operation of the switch.
•
When using the release key, turn it to the end completely.
Otherwise (under 90
˚
), switch can be damaged or malfunction.
•
Do not apply the power over 0.2 N
.
m on the release key. It can be result in product damage.
Installation
•
The head of the switch can be rotated by loosening the four screws from th e corners of the
head and reinstalling the head in the desired orientation.
•
Be sure to install the switch with the minimum radius at a hinged door as shown in the table.
Operation
key
Minimum radius
R1
R2
SFD-KH
300 mm
300 mm
SFD-KL
300 mm
300 mm
SFD-KHR
300 mm
300 mm
SFD-KLR
300 mm
300 mm
SFD-KLF
50 mm
300 mm
SFD-KLF2
50 mm
300 mm
Door hinge
R1
Door hinge
R2
•
Inspect the inserted operation key remains
within the set zone (0.5 to 3 mm).
Set zone: 0.5 to 3 mm
•
Install the operation key within ±1 mm from
the center of the operation key hole.
±1 mm
±1 mm
•
Recommended screw tightening torque
Screw
Tightening torque
Terminal screw
0.4 N
.
m
Head mounting screw (M3) 0.7 to 0.9 N
.
m
Cable cover
0.5 to 0.7 N
.
m
Cable gland
2.7 to 3.3 N
.
m
•
Cable gland specification and recommended
product
Thread
spec
MFR
Model
G1/2
LAPP
ST-PT1/2 5380-1002
M20
LAPP
ST-M20X1.5 5311-1020
•
In case of using the cable gland with the 9
mm screw thread or longer, a gap between
the switch and cable may affect the
protection structure.
•
Do not use metallic duct. Using metallic duct
can result in electric shock due to the damage
on the service entrance.
Specifications
Model
SFDL-□□□-□□
SFDL-□□□-C□□
Directing opening force
≥ 80 N
Directing opening distance
≥ 10 mm
Locking pullout strength
≥ 1,300 N
Operating speed
0.05 to 1 m/s
Operating frequency
≤ 20/min
Machanical life cycle
≥ 1,000,000 operations (20/min)
Vibration
(
malfunction
)
0.35mm amplitude at frequency of 10 to 55 Hz (for 1 min)
in each X, Y, Z direction for 10 min
Shock
1,000 m/s
2
(≈ 100 G) in each X, Y, Z direction for 3 times
Shock (
malfunction
)
80 m/s
2
(≈ 8 G) in each X, Y, Z direction for 3 times
Ambient temperature
-10 to 55℃
01)
, storage: -25 to 65 ℃
(a non freezing or condensation environment)
Ambient humidity
35 to 85 %RH , storage: 35 to 85 %RH
(a non freezing or condensation environment)
Protection structure
IP67
02)
(IEC standard, except for head)
Material
Head: zinc, case: polyamide 66, operation key: stainless steel 304
Approval
ᜢ ᜨ ᜩ ᜪ
Accessory
SFDL-□□
□
-□□K (Special type release keyse key) : rotating key
Applicable cable
AWG22
-
Connection type
Terminal type
Connector type
Unit weight (packaged)
≈ 375 g (≈ 440 g)
≈ 325 g (≈ 395 g)
01) UL approved ambient temperature: 50℃
02) Rated protection structure is for the switch body. Be cautious about preventing the head part from entering the foreign
materials such as dust and water.
Contact block
Rated voltage/current for load
Resistive load: 1 A/120 VACᜠ, 0.22 A/125 VDCᜡ
Inductive load (IEC): AC-15 1 A/120 VACᜠ, DC-13 0.22 A/125 VDCᜡ
Inductive load (UL): C150, R150
Impulse dielectric strength
Between the terminals of same polarity: 1.5 kV
Between the terminals of different polarity: 1.5 kV
Between each terminal and non-live part: 2.5kV
Insulation resistance
≥ 100 MΩ (500 VDCᜡ megger)
Contact resistance
≤ 200 mΩ
Electrical life cycle
≥ 100,000 operations (125 VACᜠ/1 A)
Conditional short-circuit current 100 A
Solenoid
Rated voltage
24 VDCᜡ, class 2
Current consumption
Supplying power: 0.26A
Normal: max. 0.2A (approx. 3 seconds after supplying power)
Insulation class
Class E