Autonics MT4N Series, Руководство по эксплуатации продукта

Страница: 4 / 6

-|Transparent Guide|-
■ Parameter 2 group
Parameter Mark Defaults Setting range
Display
condition
2-1
OUT1
operation
mode
OU!T OFF
[OUT1 output model]
OFF, HI, LO, HL, HL-G
• Refer to Output Operation Mode
-
2-2
OUT2
operation
mode
OU@T OFF
[OUT2 output model]
OFF, HI, LO, HL, HL-G
• Refer to Output Operation Mode
-
2-3
OUT1
hysteresis
HYs1 0)01
[Except indicator model]
Within 10 % of max. display range, digit
2-1 OUT1
operation
mode:
except
OFF
2-4
OUT2
hysteresis
HYs2 0)01
[Except indicator model]
Within 10 % of max. display range, digit
2-2 OUT2
operation
mode:
except
OFF
2-5
Startup
compensation
time
STaT 0)0
[Except indicator model]
0.0 to 99.9 sec
-
2-6
Peak
monitoring
delay time
PEkT 00 S
00 to 30 sec -
2-7 Display cycle
DIsT )2 S
0.1 to 5.0 sec -
2-8
Current value
display part
color
COLR RED
RED: red / red, GRN: green / green,
YEL: yellow / yellow, R-G: red / green,
G-R: green / red
• Display: normal / error occurs
-
2-9
Keys for zero
adjustment
ZERO NO
NO, YES
• YES: Press the [◀] + [▲] keys for 3
sec to adjust zero.
-
2-10
External
input
terminal
EVLN HOLD
[Except indicator model]
HOLD, ZERO
• If the external input terminal is
short-circuited for 50 ms or more, it
operates with the set function.
-
2-11
High-limit
value of
transmission
output
FS-H
5)00
[DC voltage & Transmission (DC 4 - 20
mA) output model]
Max. value of display range
-
50)0
[DC current & Transmission (DC 4 - 20
mA) output model]
Max. value of display range
25)0
[AC voltage & Transmission (DC 4 - 20
mA) output model]
Max. value of display range
%000
[AC current & Transmission (DC 4 - 20
mA) output model]
Max. value of display range
2-12
Low-limit
value of
transmission
output
FS-L
0)00
[DC voltage & Transmission (DC 4 - 20
mA) output model]
Min. value of display range
-
00)0
[DC current & Transmission (DC 4 - 20
mA) output model]
Min. value of display range
)0
[AC voltage & Transmission (DC 4 - 20
mA) output model]
Min. value of display range
)000
[AC current & Transmission (DC 4 - 20
mA) output model]
Min. value of display range
2-13
Comm.
Address
ADRS 01
[RS485 communication output model]
01 to 99
-
2-14
Comm.
speed
BPS 9600
[RS485 communication output model]
38.4k, 19.2k, 9600, 4800, 2400, 1200 bps
-
2-15 Parity bit
PRTY NONE
[RS485 communication output model]
NONE, EVEN, ODD
-
2-16 Stop bit
STP 2
[RS485 communication output model]
2, 1 bit
-
2-17 Response
waiting time
RSwT 5
[RS485 communication output model]
5 to 99 sec
-
2-18 Lock
LOC OFF
OFF: unlock,
LOC1: lock parameter 1,
LOC2: lock parameter 1, 2,
LOC3: lock parameter 0, 1 and 2
-
■ Parameter 0 group
Parameter Mark Defaults Setting range
Display
condition
0-1
OUT1 high-
limit output
setting value
OU!H
5)00
[DC voltage model], [DC current model]
-5 to 110 % of display range
2-1 OUT1
operation
mode:
except
OFF
25)0
[AC voltage model]
0 to 110 % of display range
%000
[AC current model]
0 to 110 % of display range
0-2
OUT1 low-
limit output
setting value
OU!L
0)00
[DC voltage model]
-5 to 110 % of display range
00)0
[DC current model]
-5 to 110 % of display range
[AC voltage model]
0 to 110 % of display range
)000
[AC current model]
0 to 110 % of display range
0-3
OUT2 high-
limit output
setting value
OU@H
5)00
• Same as setting range of OUT1 high-
limit output setting value
2-2 OUT2
operation
mode:
except
OFF
25)0
%000
0-4
OUT2 low-
limit output
setting value
OU@L
0)00
• Same as setting range of OUT1 low-
limit output setting value
00)0
)000
0-5
Display max.
peak value 01)
hPEK
)00
[DC voltage model]
Max. peak value in run mode
2-1 OUT1
operation
mode:
except OFF
or
2-2 OUT2
operation
mode:
except OFF
&
2-6 Peak
monitoring
delay time:
except 00
)0
[DC current model], [AC voltage model]
Max. peak value in run mode
)000
[AC current model]
Max. peak value in run mode
0-6
Display min.
peak value 01)
lPEK
)00
[DC voltage model]
Min. peak value in run mode
)0
[DC current model], [AC voltage model]
Min. peak value in run mode
)000
[AC current model]
Min. peak value in run mode
01) Reset: Press any one of [◀], [▼], [▲] keys.
Input range
Display range
Input
impedance
Diaplay method: STND (fixed) Diaplay method : SCAL 01)
0 - 5 A 0.000 to 5.000
5
Decimals Display range
0
-1999 to 9999
)0
-199.9 to 999.9
)00
-19.99 to 99.99
)000
-1.999 to 9.999
0.01 Ω
0 - 2.5 A 0.000 to 2.500
@5
0.01 Ω
0 - 500 mA 0.0 to 500.0
500
0.19 Ω
0 - 250 mA 0.0 to 250.0
250
0.19 Ω
0 - 100 mA 0.0 to 100.0
100
1.01 Ω
0 - 50 mA 0.00 to 50.00
50
1.01 Ω
01) Connect to the input terminals whose 30 % to 100 % of the input range includes the max. value of the input
range to measure.
When the max. input value is under the 30 % of the input terminal range, display accuracy is degraded.
Input range
Display range
Input
impedance
Diaplay method: STND (fixed) Diaplay method : SCAL 01)
0 - 250 VACᜠ 0.0 to 250.0
250
Decimals Display range
0
-1999 to 9999
)0
-199.9 to 999.9
)00
-19.99 to 99.99
)000
-1.999 to 9.999
1.086 MΩ
0 - 125 VACᜠ 0.0 to 125.0
125
1.086 MΩ
0 - 50 VACᜠ 0.00 to 50.00
50
199.12 kΩ
0 - 25 VACᜠ 0.00 to 25.00
25
199.12 kΩ
0 - 5 VACᜠ 0.000 to 5.000
5
19.12 kΩ
0 - 2.5 VACᜠ 0.000 to 2.500
@5
19.12 kΩ
01) Connect to the input terminals whose 30 % to 100 % of the input range includes the max. value of the input
range to measure.
When the max. input value is under the 30 % of the input terminal range, display accuracy is degraded.
Input Range and Display Range
When the max. input value is over the 100 %, it may result in input terminal damage.
■ DC voltage model
Input range
Display range
Input
impedance
Diaplay method: STND (fixed) Diaplay method : SCAL
01)
0 - 50 VDCᜡ 0.00 to 50.00
50
Decimals Display range
0
-1999 to 9999
)0
-199.9 to 999.9
)00
-19.99 to 99.99
)000
-1.999 to 9.999
433.48 kΩ
0 - 10 VDCᜡ 0.00 to 10.00
10
433.48 kΩ
0 - 5 VDCᜡ 0.000 to 5.000
5
43.48 kΩ
0 - 1 VDCᜡ 0.000 to 1.000
1
43.48 kΩ
0 - 250 mVDCᜡ 0.0 to 250.0
250
2.28 kΩ
0 - 50 mVDCᜡ 0.00 to 50.00
50
2.28 kΩ
01) Connect to the input terminals whose 30 % to 100 % of the input range includes the max. value of the input
range to measure.
When the max. input value is under the 30 % of the input terminal range, display accuracy is degraded.
■ DC current model
■ AC voltage model
■ AC current model
Input range
Display range
Input
impedance
Diaplay method: STND (fixed) Diaplay method : SCAL
01)
0 - 500 mA 0.0 to 500.0
500
Decimals Display range
0
-1999 to 9999
)0
-199.9 to 999.9
)00
-19.99 to 99.99
)000
-1.999 to 9.999
0.22 Ω
0 - 200 mA 0.0 to 200.0
200
0.22 Ω
0 - 50 mA 0.00 to 50.00
50
2.22 Ω
4 - 20 mA 4.00 to 20.00
4-20
2.22 Ω
0 - 5 mA 0.000 to 5.000
5
22.22 Ω
0 - 2 mA 0.000 to 2.000
2
22.22 Ω
01) Connect to the input terminals whose 30 % to 100 % of the input range includes the max. value of the input
range to measure.
When the max. input value is under the 30 % of the input terminal range, display accuracy is degraded.