K-89
Weekly/Yearly Timer
(A)
Photoelectric
Sensors
(B)
Fiber
Optic
Sensors
(C)
Door/Area
Sensors
(D)
Proximity
Sensors
(E)
Pressure
Sensors
(F)
Rotary
Encoders
(G)
Connectors/
Sockets
(H)
Temperature
Controllers
(I)
SSRs / Power
Controllers
(J)
Counters
(K)
Timers
(L)
Panel
Meters
(M)
Tacho /
Speed / Pulse
Meters
(N)
Display
Units
(O)
Sensor
Controllers
(P)
Switching
Mode Power
Supplies
(Q)
Stepper Motors
& Drivers
& Controllers
(R)
Graphic/
Logic
Panels
(S)
Field
Network
Devices
(T)
Software
RUN mode
Program 1 Yearly program
record No.1 [
r01
]
setting check
Program 1 Yearly program
record No.1 [
r01
] setting
modify and delete
Program 1 Yearly program
record No.2 [
r02
] setting
modify and delete
Program 2 Yearly program
record No.1 [
r01
] setting
modify and delete
Program 1 Yearly program
record No.2 [
r02
]
setting check
Program 2 Yearly program
record No.1 [
r01
]
setting check
CHECK
CHECK
CHECK
Yearly program check, modify and delete
※
YEAR
turns ON when check, modify or delete yearly
program.
● If any key is untouched for 60sec, it is returned to RUN
mode in weekly or yearly program check.
● In weekly or yearly program check, it controls output
according to program setting and output is OFF in
modify or delete mode.
● When
MODE
key is pressed in weekly or yearly program
record modify, delete stand by or delete mode, current
work is cancelled and it is returned to check mode.
● Weekly or yearly program record modify and delete
(1) Program record modify
①
When press
SET
key over 3sec. in program check,
EDT
flashes in second display part, press
SET
key.
②
It returns to check mode when finish the modify same
as the above procedure.
(2) Program record delete
①
When press
SET
key over 3sec. in program check,
EDT
flashes in second display part, press or key until
CLR
flashes in second display part and press
SET
key.
②
Press
CLR
key over 3sec. when
SET
turns ON in second
display part, it returns to program check.
RUN mode
Program 1 weekly program
record No.1 [
r01
]
setting check
Program 1 weekly program
record No.1 [
r01
] setting
modify and delete
Program 1 weekly program
record No.2 [
r02
] setting
modify and delete
Program 2 weekly program
record No.1 [
r01
] setting
modify and delete
Program 1 weekly program
record No.2 [
r02
]
setting check
Program 2 weekly program
record No.1 [
r01
]
setting check
Program Check, Modify And Delete
Press
CHECK
key for 1sec.
CHECK
CHECK
CHECK
Weekly program check, modify and delete
Press
MODE
key
for 3sec.
Press
SET
key for 3sec.
Press
SET
key for 3sec.
Press
SET
key for 3sec.
Press
CHECK
key for 1sec.
Press
MODE
key
for 3sec.
Press
SET
key for 3sec.
Press
SET
key for 3sec.
Press
SET
key for 3sec.
※
It is able to set year of start/end date in yearly program
setting up to 2 years later from the present year.
key is pressed, move the
flashing to hour position and
select PM by or key
when ON time is afternoon.
⑤
ON time setting (AM, PM)
SUN MON TUE WED THU FRI SAT
⑧
Complete to set
Press
SET
key to set ad-
ditional program.
SUN MON TUE WED THU FRI SAT
⑦
Pulse width setting
Press or key 4 times
to select pulse width as 5s
and press
SET
key.
SUN MON TUE WED THU FRI SAT
⑥
ON time setting (Hour, Minute)
Press or key twice to
set 10 and press
SET
key
after check 00min.
SUN MON TUE WED THU FRI SAT
