Autonics ARIO-C-MT, Руководство пользователя

Страница: 6 / 29

Safety Considerations
vi © Copyright Reserved Autonics Co., Ltd.
Safety Considerations

Please observe all safety considerations for safe and proper product operation to avoid
hazards.

Safety considerations consist of ‘warning’ and ‘caution. The following symbols represent
caution due to particular circumstances in which hazards may occur.
Warning
Failure to follow instructions can result in serious injury
or death.
Caution
Failure to follow instructions can lead to a minor injury
or product damage.

Fail-safe device must be installed when using the unit with machinery that may cause
serious injury or substantial economic loss. (e.g. nuclear power control, medical equipment,
ships, vehicles, railways, aircraft, combustion apparatus, safety equipment, crime/disaster
prevention devices, etc.)
Failure to follow this instruction may result in personal injury, economic loss or fire.

Do not use the unit in the place where flammable/explosive/corrosive gas, high humidity,
direct sunlight, radiant heat, vibration, impact, or salinity may be present.
Failure to follow this instruction may result in explosion or fire.

Do not disassemble or modify the unit.
Failure to follow this instruction may result in fire.

Do not connect, repair, or inspect the unit while connected to a power source.
Failure to follow this instruction may result in fire.

Check ‘Connections’ before wiring.
Failure to follow this instruction may result in fire.

Use the unit within the rated specifications.
Failure to follow this instruction may result in fire or shortening the life cycle of the product.

Use a dry cloth to clean the unit, and do not use water or organic solvent.
Failure to follow this instruction may result in fire or electric shock.

When connecting the power input and I/O wiring, use AWG 22~16 cable.
After checking the connecting and removing the wire, use the crimp terminal.
Failure to follow this instruction may result in fire or malfunction due to contact failure.

Keep the product away from metal chip, dust, and wire residue which flow into the unit.
Failure to follow this instruction may result in fire or product damage.

Do not cut off power or disconnect connectors (or terminals) while operating the unit.
Failure to follow this instruction may result in fire or product damage.
※
The specifications and dimensions of this manual are subject to change without any
notice