Autonet K6860631 Скачать руководство пользователя страница 3

Страница: 3 / 4

13. Using crimping tool, crimp the splice clip and wires
together.
14. Repeat the previous two steps for the ground side

wires.

15. Solder (3) the connection (2) together using rosin core

solder (1).

16. Center the heat shrink tubing (2) over the solder joint

and heat using a heat gun. Heat the joint until the tub-

ing is tightly sealed and sealant (1) comes out of both

ends of the tubing.

March 15, 2009

K6860631 Rev. 1

Содержание K6860631

Страница 1: ...position 2 Disconnect the negative battery cable 3 Remove the four fasteners 2 on both sides of the stor age bin 4 Carefully disengage the two spring clips from the top center of the bin and pull the...

Страница 2: ...0 5 in of insula tion from each wire that needs to be soldered spliced 10 Place a piece of supplied adhesive lined heat shrink tubing on one side of each cut wire Insure the tubing will be long enough...

Страница 3: ...the ground side wires 15 Solder 3 the connection 2 together using rosin core solder 1 16 Center the heat shrink tubing 2 over the solder joint and heat using a heat gun Heat the joint until the tub in...

Страница 4: ...onnect the elec trical connectors 18 Seat the storage bin and engage the spring clip retain ers 19 Install the four fasteners 4 on both sides of the stor age bin 20 Connect the negative battery cable...