TR2450AE
2022-01-21 © Automotive Data Solutions Inc. 11/15
With iDatastart Remote:
Turn ignition ON, then press
FUNCTION
# OF PARKING LIGHT FLASHES
Valet Mode ON
1
Valet Mode OFF
2
With iDatastart Antenna:
Turn ignition ON, then press & hold button for 5 seconds
FUNCTION
# OF PARKING LIGHT FLASHES
Valet Mode ON
1
Valet Mode OFF
2
REMOTE START TROUBLESHOOTING
If your iDatastart remote fails to start the vehicle, the parking lights will flash three times immediately, then
flash a number of times according to the errors below:
# OF PARKING LIGHT FLASHES
DIAGNOSTIC
SOLUTION
3 + 1
Need to learn tach
3 + 2
Key in ignition at ON position
Remove key from ignition
3 + 3
Door is open
Close door
3 + 4
Trunk is open
Close trunk
3 + 5
Brake is detected
Release brake
3 + 6
Hood is open
Close hood
3 + 7
Reservation not done (manual only)
Perform reservation procedure
3 + 8
Tach failure
Contact Authorized Dealer
3 + 9
VSS detected (vehicle in movement)
Contact Authorized Dealer
3 + 10
System is in Valet Mode
Exit Valet Mode
3 + 11
Can communication failure
Contact Authorized Dealer
3 + 12
Can communication failure
Contact Authorized Dealer
3 + 13
Bypass error
Contact Authorized Dealer
3 + 14
No Pitstop or Takeover available
Contact Authorized Dealer
3 + 15
Module overheat protection
Contact Authorized Dealer
