Chapter 8: Installation and Wiring
Do-more T1H Series PLC User Manual, 1st Edition, Rev. C
8-9
Assembling the Components
Assembling the I/O Modules and Bases
INSERT MODULE INTO BASE
1. Pull base arm back to allow space
for module to enter base.
2. Align module slides with base track.
3. Press module firmly into base.
Mounting the Components on DIN Rail
NOTE:
Do not force the module on the DIN rail. Due to slight size variations in different manufacturers’ DIN
rail, it may be necessary to first unlatch the locking tab, rotate the module into place, then latch the locking
tab.
INSTALL ON DIN RAIL
1. Make sure the locking tab is in the latched position (pushed in).
2. Hook upper tab over upper flange of DIN rail.
3. Tilt the unit toward DIN rail until it snaps securely to DIN rail.
2
1
3
1
2
3
