www.productivity2000.com
Tech Support 770-844-4200
2
Important Hot-Swap Information
The Productivity2000 supports hot-swap!
Individual
modules can be taken offline, removed, and replaced
while the rest of the system continues controlling your
process. Before attempting to use the hot-swap feature,
be sure to read the hot-swap topic in the programming
software’s help file or our online documentation at
AutomationDirect.com for details on how to plan your
installation for use of this powerful feature.
QR Code
Use any QR Code reader application to
display the module’s product insert.
1
Align
with slot
2
rotate
to seated
position
Module Installation
WARNING:
Do not apply field power until
the following steps are completed. See
hot-swapping procedure for
exceptions.
WIRE STRIP
LENGTH
WIRE STRIP
LENGTH
Step One:
Align module
catch with base slot and
rotate module into
connector.
Locked
Unlocked
Step Two:
Pull top locking tab
toward module face. Click indi-
cates lock is
engaged.
Step Three:
Attach field wiring using the removable
terminal block or ZIPLink wiring
system.
Caution:
If possible, remove field power prior to
proceeding. If not, then
EXTREME
care
MUST
be taken
to prevent damage to the module, or even personal injury
due to a short circuit from the live terminal block.
