2
Tech Support 770-844-4200
www.productivity1000.com
Output Specifications
Outputs per Module
2
Output Range
4–20 mA
Signal Resolution
12-bit
Resolution Value of LSB
(least significant bit)
4–20 mA = 3.9 µA / count
1 LSB = 1 count
Data Range
0–4095 counts
Output Type
Current sourcing at 20mA max
Output Value in Fault Mode
Less than 4mA
Load Impedance
0–570
(19.2 VDC), 0–690
(21.6 VDC),
0–810
(24.0 VDC), 0–930
(26.4 VDC),
0–1100
(30.0 VDC)
Minimum Load: 0
@ 0–45 °C
125
@ 45–60 °C ambient temperature
Maximum Inductive Load
1mH
Allowed Load Type
Grounded
Maximum Inaccuracy
1% of range
Full Scale Calibration Error
±0.2% of range minimum
Offset Calibration Error
±0.2% of range maximum
Accuracy vs. Temperature
±75 PPM / °C maximum full-scale
calibration change (±0.005% of range / °C)
Max Crosstalk at DC, 50Hz and
60Hz
-72dB, 1 LSB
Linearity Error (End to End)
±4 counts max., (±0.1% of full scale)
Output Stability and
Repeatability
±2% counts after 10 min. warm up (typical)
Output Ripple
±0.2% of full scale
Output Settling Time
0.3 ms max., 5µs min. (full scale range)
All Channel Update Rate
4ms (max)
Maximum Continuous Overload
Outputs open circuit protected
Type of Output Protection
Electronically current limited to 20mA or less
Output Signal at Power Up and
Power Down
4mA
Input Specifications
Inputs per Module
4
Module Signal Input Range
0–20 mA
Signal Resolution
13-bit
Resolution Value of LSB
(least significant bit)
0–20 mA = 2.44 µA per count
(1LSB = 1 count)
Data Range
0–8191 counts
Input Type
Sinking, Single-ended (1 common)
Maximum Continuous Overload
±31mA
Input Impedance
247
, ±0.5%, 1/4W Current Input
Filter Characteristics
Low Pass, -3dB @ 120Hz
Sample Duration Time
4ms per channel
(does not include ladder scan time)
All Channel Update Rate
20ms
Open Circuit Detection Time
Zero reading within 100ms
Conversion Method
Successive approximation
Accuracy vs. Temperature
±75PPM / ºC maximum
Maximum Inaccuracy
0.5% of range
(including temperature drift)
Linearity Error (end to end)
±0.037% of range
Monotonic with no missing codes
Input Stability and Repeatability
±0.024% of range (after 10 minute warm-up)
Maximum Full Scale Calibration
Error
±0.098% of range
Offset Calibration Error
±0.098% of range
Maximum Crosstalk at DC,
50Hz and 60Hz
±0.049% of range
Recommended Fuse (external)
Edison S500-32-R, 0.032 A fuse
External Power Supply Required
24VDC (-20% / + 25%), 140mA (Loop Power
Included)
